Steel bumpers

More 4×4 steel bumpers are designed for special vehicles and do not have road approval. This is an excellent protection of a car used for off-road against mechanical damage, as well as a way to safely mount a winch.

Bumpers made of 3, 4 and 6 mm steel, they have reinforcements for the mounting points of the shackle brackets, and the front bumpers also have a winch mounting plate.

As part of the mounting system, More 4×4 bumpers also have side supports based on the frame and corners of the bumper. This solution makes the structure more rigid and gives the possibility of precise adjustment of the bumper in relation to the car body.

More 4×4 rear bumpers ( they do not need to have approval ) designed for pick up vehicles are equipped with special bushings that allow the installation of Gondola, which is a holder for the spare wheel and canisters. The Gondola also has a Hi-Lift jack mount and a fold-out table on its inside.

Both front and rear More 4×4 bumpers provide for the installation of work , daylight or fog lights.

All More 4×4 bumpers, after blasting, are painted in three layers: zinc primer, Sahara coating characterized by a hard, hard-to-wear surface and, finally, they are covered with oven-applied „Cracked Desert” structural paint applied using a powder coating technique. All external bolts, on the bumper shells and at the lighting frames are made of stainless steel, and the mounting system bolts are galvanized steel.